FAQs -

FAQs

FAQs
Search Result

Do we need to connect the neutral wire?

Yes, you need to connect the live, neutral and load wire at the back of the light switch. When you use CG100H or CG800H series, since this is control panel only, you need to connect live and neutral wire to CG101AD mini power supply, then connect the output of CG101AD to the DC input of CG100H or CG800H. The load should be connected to the CG400 series.

我們需要連接中性線嗎?

是的,你需要連接火線, 零線(中線)及負載線。 對於CG100H,CG800H系列,因為它們是控制面板而已,所以你只需要連接的火線和中性到CG101AD,然後CG101AD直流輸出應連接到CG100H/ CG800H。 而負載線,應連接到CG400系列模塊/模塊。

People says the wireless control distance is unlimited ! is that true?

Yes but no ! The ZigBee wireless signal can intelligently "route" to the "point of interest". The meaning is that you have installed ZigBee switch on 1st floor, 2nd floor, .......5th floor for example, if you are at 1st floor and want to control the switch at 5th floor, the wireless remote radio signal will first talk to the switch at 1st floor, then the switch at 1st floor will see if the command is for it or not. If not, it will pass the signal to the next neighbour switch, say 2nd floor and so and so... to propagate to 5th floor. That means to say, the more you install ZigBee devices around you area, the larger the area you can control.

人們說,ZigBee的無線控制距離是無限遠的! 真的嗎?

沒錯但有所保充! ZigBee無線信號可以智能“路由”到“興趣點”。意思是,例如你已經安裝的ZigBee開關在1樓,2樓,.......5樓,如果你是在一樓,要控制在5樓的開關,無線電信號會先與在一樓的開關溝通,然後在1樓的開關將查看該命令是否給自已的。如果不是,它會傳遞信號給下一個鄰居開關,例如二樓等等......直至傳播到5樓。

How to select using CG110 series or CG100H series, they look almost the same?

For CG110 series, the load is connected to the back of it. For CG100H series, since it is control keypad only, you need to connect the load to CG400 series. The CG100H is like you put a remote control on the wall.

如何選擇使用CG110系列還是CG100H系列?他們看起來幾乎一樣的嗎?

CG100H系列僅僅是一個控制面板。它的工作原理就像裝在牆壁上的遙控器。負載是沒有連接到它的背面。在這種情況下,負載連接到CG400天花板模塊。所以,你需要有一個假天花來隱藏CG400模塊。 而CG110系列,負載是連接到它的背面。你並不需要安裝CG400模塊,所以你不需要有假天花板來隱藏模塊。

I select to use the CG110S4 four gang switch. Can i use just 3 gang for switching on/off 3 different lamps and then i use the 4th button to function as a master on/off for those 3 lamps?

Yes, the 4th button can be programmed as a "mood" or "scene" function. You can preset through HomeNet Planner software that you can download from Citygrow website.

我選擇使用CG110S4四位開關。我可以只使用3位做開啟/關閉3個不同的燈,然後我用第4鍵來做3個燈的縂開關嗎?

可以的,第4個按鈕可以被編程為“場景”功能。 您可以通過家庭網絡規劃軟件 HomeNET Planner,您可以從Citygrow網站下載預設。

I download the HomeNet planner software from citygrow website. But it seems no way to connect to my ZigBee devices?

Yes, you need to purchase the CG101UTC USB to com cable and CG101UT5 USB to 5 pin cable in order to connect the switch to the PC and so to add the switch to you home ZigBee network. Please note for CG110, CG100, CG400 series you need CG101UTC plus CG101UTU, not UT5. Furthermore, you need to purchase CG101DG ZigBee dongle in order to wireless config the "mood"/"Scene" detail settings.

我從citygrow網站下載策劃師家庭網絡軟件 (Homenet planner)。但似乎沒有辦法連接到我的ZigBee設備?

是的,你需要購買CG101UTC USB轉COM線, CG101UT5 USB至5芯電纜,以便將citygrow燈制接到電腦,從而把燈制添加到您家的ZigBee網絡。 請注意,CG110,CG100,CG400系列需要CG101UTC加CG101UTU,不是UT5。 此外,你需要為了購買CG101DG的ZigBee USB Dongle,無線配置“場景”。